Sale!

1 pair (2 pieces) 10mm Sennheiser IE80 Drivers

$28.99 $18.99

  • Sennheiser IE80 dynamic driver
  • Driver Type: Dynamic
  • Impedance @ 1kHz: 16 Ohms, suitable for smart phones, iPhones and iPads, strongly recommend working with earphone amplifiers.
  • Sensitivity: 125 dB SPL/V
  • Flat frequency response – 10-20000Hz
  • Harmonic distortion < 0.3% at 1Khz
  • Power: 5MW ~ 20MW
  • Magnetic steel: NdFeB
SKU: 10mm Sennheiser IE80 Drivers Category:

Description

Features and specifications

This is the original drivers used in Sennheiser IE80 , See the review on IE80 from Goldenears, and the YouTube video below “They’re really impressive earbuds.”

Also see the teardown of a genuine IE80, and notice the driver unit.
10mm Sennheiser IE80 Drivers
10mm Sennheiser IE80 Drivers

 

Package

1 Pair (2 pieces) Sennheiser IE80 Drivers

2 pieces of front cover spacer (for air sealing in installation)

Measurements

This is the measurement of original IE80 at Goldenears.

10mm Sennheiser IE80 Drivers

And the measurements of the driver in our Rosewood shell.

Measurement is based on IEC711 coupler, a customized USB sound card and Win10 PC running ARTA software.

The frequency response (Notice the curve is almost identical as original IE80 at mid and treble, and having better extension at the 20-50Hz sub-bass).  

 

The CSD (Cumulative Spectral Decay) – note from 1K to 12KHz, the decay is very consistent, meaning minimized interference and clear sound. 

10mm Sennheiser IE80 Drivers

The Pulse Response – note the short period <2.5ms offering high resolution 

The  Burst Decay – again, note the consistency among different bands, and there are only few burst at resonance points at 6K and 10Khz. 

 10mm Sennheiser IE80 Drivers

THD and D2 – Note the yellow line is the THD of the measurement system and need to deduced from the total THD. The Also notice the D2 taking majority of the total THD, meaning the sound character is smooth and sweet. 

 

Note: the dynamic drivers have been paired to ensure sound and quality fully balanced between right and left channels. Therefore we don’t offer single unit.  

Proceed with caution: dynamic driver is with extremely fragile (1~5μm) diaphragm and can be easily damaged in following situations.

  • Soldering: overheated (>250 degree C) soldering iron or overtime soldering (>2s) may permanently damage the driver. Please managed down both in your DIY.
  • Installation: the driver has Sintered NdFeB Magnetic inside with extremely strong attraction power. Damage may caused by attracting anything hitting the fragile diaphragm. 
  • Others: applying high-voltage, storing in high temperature/humidity environment… all may cause unrecoverable damage.

Additional information

Weight 0.1 kg
Dimensions 15 × 10 × 3 cm

Reviews

There are no reviews yet.

Be the first to review “1 pair (2 pieces) 10mm Sennheiser IE80 Drivers”

Your email address will not be published. Required fields are marked *

You may also like…

  • 7.8mm inner ear XWB (Extra Wide Band) Sennheiser IE800 dynamic driver

    1 pair (2 pieces) 7.8mm XWB IE800 Drivers

    Sale! $59.99 $29.99
    Add to cart
  • Sennheiser IE800 Ceramic In-Ear Earphone Shell for 6.5mm driver unit

    Ceramic In-Ear Earphone Shell for Sennheiser IE800 and 6.5mm driver unit

    Sale! $28.99 $15.99
    Add to cart