1 pair (2 pieces) 9mm B&O Compatible In-ear Earphone Driver

$15.99

  • Compatible driver unit with many Hi-End in-ear earphones, like B&O or Monster Turbine Pro.
  • Highly recommend for the Turbine headphone shells or upgrading your low-end earphones.
  • 9mm*5.1mm Hi-Fi dynamic driver, neodymium drivers and OFC coils for accurate reproduction.
  • Driver Type: Dynamic
  • Impedance @ 1kHz: 32 Ohms, suitable for smart phones, iPhones and iPads, strongly recommend working with earphone amplifiers.
  • Sensitivity: 113 dB SPL/V
  • Flat frequency response – 20-20000Hz
  • Harmonic distortion < 0.5%
  • Power: 5MW ~ 20MW
  • Magnetic steel: NdFeB
SKU: 9mm B&O Compatible In-ear Earphone Driver Category:

Description

Features and specifications

  • Compatible driver unit with many Hi-End in-ear earphones, like B&O or Monster Turbine Pro.
  • Highly recommend for the Turbine headphone shells or upgrading your low-end earphones.
  • 9mm*5.1mm Hi-Fi dynamic driver, neodymium drivers and OFC coils for accurate reproduction.
  • Driver Type: Dynamic
  • Impedance @ 1kHz: 32 Ohms, suitable for smart phones, iPhones and iPads, strongly recommend working with earphone amplifiers.
  • Sensitivity: 113 dB SPL/V
  • Flat frequency response – 20-20000Hz
  • Harmonic distortion < 0.5%
  • Power: 5MW ~ 20MW
  • Magnetic steel: NdFeB

Package

1 Pair (2 pieces) 9mm B&O Compatible Inner-ear Earphone Driver

9mm B&O Compatible Inner-ear Earphone Driver
9mm B&O Compatible Inner-ear Earphone Driver

Most recommend to be used with our Turbine headphone shells, or 9~10mm wooden shells. 

Note: the dynamic drivers have been paired to ensure sound and quality fully balanced between right and left channels. Therefore we don’t offer single unit.  

Some pictures taken from DIY earphones. We’ll share more on www.earphonediylabs.org 

 

 

 

Proceed with caution: dynamic driver is with extremely fragile (1~5μm) diaphragm and can be easily damaged in following situations.

  • Soldering: overheated (>250 degree C) soldering iron or overtime soldering (>2s) may permanently damage the driver. Please managed down both in your DIY.
  • Installation: the driver has Sintered NdFeB Magnetic inside with extremely strong attraction power. Damage may caused by attracting anything hitting the fragile diaphragm. 
  • Others: applying high-voltage, storing in high temperature/humidity environment… all may cause unrecoverable damage.

Additional information

Weight 0.1 kg
Dimensions 15 x 10 x 3 cm

Reviews

There are no reviews yet.

Be the first to review “1 pair (2 pieces) 9mm B&O Compatible In-ear Earphone Driver”

Your email address will not be published. Required fields are marked *