Crystal Art Sound Isolating Earphones DIY Kit, Series 1

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

$55.99$69.99

Specification

  • 2 pieces of 10mm Dynamic Drivers of Sennheiser IE80S
    • Impedance: 16 Ω
    • Frequency response: 10-20,000Hz
    • Sound pressure level (SPL)116 dB (1 kHz / 1 VRMS)
    • THD (Total Harmonic Distortion) < 0.1 % (1 kHz / 100 dB SPL)
    • Attenuation- 26 dB 

  • 1 set of Crystal Art earphone shells
    • Gear Art front cover with an unique Gear Art pattern which can never be found on another shell 
    • Highly durable engineering resin
    • 2 color options of the house: Crystal or Black

  • 1.2m 5N OFC braided cable
    • Minimized Stethoscope effect
    • 3.5mm gold plated jack
  • 2 pairs of Sennheiser IE80S ear-tips
    •  2 stages silicon
    • Memory foam
Clear
SKU: Crystal Art Sound Isolating Earphones DIY Kit S1 Category:

Description

Introduction 

This is Crystal Art Sound Isolating Earphones DIY Kit designed by Earphone DIY Labs, which is with phenomenal crystal outlook, and 2 dynamic drivers from Sennheiser IE80S. By having basic soldering and gluing skills and the state of art components offered by us, you can easily make your own audiophile-grade earphone in 1~2 hours. 

Don’t want to take the risk of messing something up? No problem, choose the Assembling Option and let our professionals make it for you, giving you a complete pair of Crystal Art Sound Isolating Earphones for a bargain price. No assembly needed.

How does the Crystal Art kit sound?

The IE80S Dynamic Drivers make the build very much like the original IEM – we measured and observed 95%+ similarity in the Frequency Response with the original earbuds delivered by the manufacturers.  

Dynamic Drivers from Sennheiser IE80S

Want to know more about dynamic drivers of Sennheiser IE80S? See the official video from Sennheiser. 

As reviews of the sound quality could be very subjective, we collected some 3rd party impressions on IE80S which we think also apply to our kits, together with our own impressions. This is only for your reference and we have no grantee that you will have exactly same impression. 

Sound signature

Reasonably balanced throughout the highs and mids, with a gradual emphasis towards low bass. 

Bass

Very powerful bass.It’s authoritative and the best choice for basshead audiophiles. Some reviews said the sub-bass of IE80S is not as deep as IE800, while we think they must not have measure it carefully. Benefit from 10mm drivers (3 times larger than IE800), the kit offers much better fidelity (<1%) and the bass sounds natural and real (unlike IE800 which has the bass a bit over bloated). As the bass is not adjustable as IE80S, we set it to default (mid) level which works best for most users.

Mids

The mid-range is clearer and more resolving in comparison to the IE80. But still, the mid-range is fairly recessed compared to the bass and the treble peak. As a result, the vocals do not have the immediacy, size and density. So this is not an IEM for vocals, especially the female vocals as they may sound delicate. But given the enhanced bass, there is a certain thickness to the mid-range that helps the presence adequately, especially the male vocals. The mid-range overall is a bit relaxed. 

Note, we noticed this well known character inherited from IE80S and working on a solution. 

Highs

The treble was anything but bright. It did have a small peak in the lower treble at around 6kHz. Whether this brightness is a positive or a negative aspect, depends on one’s preference and tolerance for the treble. While there is definite brightness from this peak, it doesn’t put the IEM in the ‘Bright IEM’ category. It’s still a warm IEM, with some brightness showing its head once in a while. Except for this peak, the treble is linear and smooth..

Dynamics / Soundstage / Separation / Imaging

One of the biggest highlights of this kit is its huge soundstage. If you have been used to IE800, the 1st second impression would be the space getting 5 times bigger. And the feeling is like being unlocked from a chamber, and every instrument seems being restored from a point of sound to a real one with 3D shape. Many IEMs in $300 have come close to match or surpass the width. But what makes this kit’s stage special is its depth. Although, there is not an abundance of air in the stage, the depth makes the stage appear more 3D. While the imaging is not pin-point precise, it has a certain realism due to the instruments in a 3D space. The abundant space allows for good instrument separation and layering. But the IEM can tend to congestion as it is warm and its speed is not the best.

Known limitations

It’s a common issue for all IEMs using micro drivers being picky to ear-tips. And the result is you have to find one perfectly fitting your ear canal, otherwise the low bass would be seriously impaired.

The good news is we solve it for you and for free! We include following 2 pairs of ear-tips in the kit after measuring tens of different models:

  • 2-flange Silicon ear-tips (black, mid size) which doubles the sealing than normal ear-tips – made in Germany and adopted by Sennheiser IEMs

  • Memory foam ear-tips (black, mid size) made in Germany – super noise cancellation and airtight, gives you the best performance 

How can I assure I get what is advertised in this kit?

Email to service@earphonediylabs.com if you want the original measurement of your KIT – we test the Frequency Response, Cumulative Spectral Decay, Burst and Energy Decay, Impulse Response using standard IEC 711 coupler, customized sound card and ARTA software – and we can offer both snapshot or raw data file.

Frequency Response

What’re in this DIY KIT? 

The KIT includes everything you need to build the Crystal Art earphone.

  1. 1 pair of Crystal Art earphone shell, 2 color options: Crystal or Black 
  2. 2 X 10mm dynamic driver units, used by Sennheiser IE80S
  3. 1 X 5N OFC braided cable, with 3.5mm golden plated jack, 1.2m length, brown color 
  4. 2 pairs of ear-tips – one 2-flange and one middle size memory foam

To reduce difficulty for beginners, we have already assembled the trickiest parts.

  • The driver is pre-installed in the housing
  • The anti-dust net is pre-installed
  • Sound is fine tuned, incl. adjusting driver position, apply damping materials in the front canal if necessary  

The Crystal Art earphone shell

The shell is built with highly durable engineering resin by high precision molds. There is no glue needed during installation, making the earphone perfectly green and healthy.

Note every front cover has an unique gear art pattern which you will never find on any other shell. So it’s exclusively for you.

 

The 10mm dynamic drivers

The 5N OFC cable with 3.5mm gold plated jack

 

OK, can I assemble it now?

The entire process takes 2 hours including 1hour waiting for the glue to dry. AMA on Reddit u/earphonediylabs or contact our service account for any issue. Note in this kit, you can skip the most difficult 3 steps.

Tools you will need

You will need an ordinary soldering iron and tin, a diagonal pliers, and a slow dry glue (e.g., E8000). If you have IEC711 coupler then you are able to further understand the build, but it is not mandatory – use your ear!

Image result for soldering iron

Image result for diagonal pliers,

Image result for e8000 glue

 

Step 1 Install the driver to the housing

We recommend and use E8000/B7000 or other slow dry glues. These are easy to find in any hardware store.

Apply some glue around the driver and stick the drivers to the housing

Apply some glue around the wire pipe and stick it to the housing.

 

Step 2 Wiring

Wire the cable in the order as illustrated below.

Knot and stick the cable to the wire pipe. 

Step 3 Soldering

Now solder the cable to the driver, being careful to connect the wire to the correct polarities.

After soldering, measure the frequency response to make sure the installation is correct. We use IEC711 coupler and ARTA software. 

Step 4 Assembling the shell

Stick the anti-dust net to the shell and put on the cover. Thanks to the high precision, no glue needed in this step, and you just need to push a little bit hard!

And done! Eventually you get these nice IEMs.

How if I have special requirements?

Please leave your requirements in the ordering note and we’ll handle them accordingly, or contact our service account for any issue. 

Additional information

Weight 0.1 kg
Dimensions 15 × 10 × 3 cm
Color

Crystal, Black

Choose Assembling Option

Assemble it for me, I want separated components and DIY

1 review for Crystal Art Sound Isolating Earphones DIY Kit, Series 1

  1. Rated 5 out of 5

    Earphone DIY Labs Service

    Comment is unlocked, welcome for any feedback!

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • 8mm Monster Turbine Pro In-Ear Earphone Driver

    1 pair (2 pieces) 8mm Monster Turbine Pro In-Ear Earphone Driver

    Sale! $25.99 $19.99
    Add to cart
  • 5N OFC Earphone Cable with 3.5mm plug and MIC

    $8.99
    Add to cart
  • Silver Plated OFC Earphone Cable with 3.5mm plug and MIC

    Silver Plated OFC Earphone Cable with 3.5mm jack and MIC

    Sale! $25.99 $18.99
    Add to cart
  • 6N OCC Earphone Cable with 3.5mm plug

    6N OCC Earphone Cable with 3.5mm plug (no MIC)

    Sale! $39.99 $18.99
    Add to cart
  • 1 pair (2 pieces) 7.8mm Ultra Low THD Titanium Drivers

    Sale! $25.99 $12.99
    Add to cart
  • Heart of the Ocean Earphone Cable with 3.5mm plug

    $11.99
    Add to cart
  • 7.8mm inner ear XWB (Extra Wide Band) Sennheiser IE800 dynamic driver

    1 pair (2 pieces) 7.8mm XWB IE800 Drivers

    Sale! $59.99 $29.99
    Add to cart
  • Manual Braided 5N OCC Earphone Cable with 3.5mm plug

    Sale! $18.99 $13.99
    Add to cart
  • 6.5mm B&O H5 Inner-ear Earphone Driver

    1 pair (2 pieces) 6.5mm Drivers from Bang & Olufsen Beoplay H5 Wireless Bluetooth Earbuds

    Sale! $29.99 $16.99
    Add to cart